QRS Inspections
Home
About Us
Our Services
Sewer Inspection
QRS Inspections
Home
About Us
Our Services
Sewer Inspection
More
  • Home
  • About Us
  • Our Services
  • Sewer Inspection
  • Home
  • About Us
  • Our Services
  • Sewer Inspection

Sewer Scope

What does a complete sewer scope mean?

  

During a sewer scope, a camera is advanced through an accessible entry point into the property’s main sewer service line. The inspector observes and records visible interior conditions as the camera travels.

The intended endpoint may be the municipal connection, the edge of private responsibility, a septic component, or another identifiable location, depending on the property and system. The camera’s ability to reach that point depends on access, pipe configuration, line condition, visibility, and the equipment’s physical limits.

Even when the camera reaches an apparent endpoint, a sewer scope remains a visual inspection of accessible areas. It is not a guarantee of future performance and does not reveal conditions outside the pipe.


Why might the camera stop?

Several different conditions can limit a sewer inspection. The reason matters because it helps determine what may be useful next.


Debris or buildup

Grease, waste, mineral deposits, construction material, or other debris may restrict the pipe or prevent the camera from traveling farther. Material can also coat the lens or cloud the water, reducing visibility even when the camera continues.

Cleaning the line may improve access and allow a clearer reinspection. Cleaning is not the same as confirming the pipe’s condition; a follow-up camera inspection may still be necessary to observe what was hidden.


Root intrusion

Roots may enter through a crack, loose joint, or damaged connection and continue growing inside the line. Dense root growth can stop the camera or obscure the surrounding pipe.

Removing the roots may allow the inspection to continue, but buyers should also consider the condition that permitted entry. A qualified sewer contractor may need to evaluate the affected area and discuss maintenance or repair options.


Standing water

Water in a low section can partially or completely submerge the camera. When that happens, the bottom and sides of the pipe may not be visible.

The camera may pass through a shallow area, or a deeper section may prevent useful inspection. A camera can document the presence of water but cannot independently confirm the exact slope, depth, or exterior cause of the condition.


Damaged or deformed piping

A broken, collapsed, crushed, or deformed section may narrow the opening enough to stop the camera. Forcing equipment through a restricted area could damage the camera, make retrieval difficult, or worsen an existing condition, so the inspector may appropriately end the attempt.

Locating the stopping point and obtaining a qualified contractor’s evaluation may be recommended.


Tight turns or pipe configuration

Some sewer systems contain sharp changes in direction, multiple fittings, diameter changes, or other configurations that a camera cannot safely navigate. The inability to pass a fitting does not by itself establish that the pipe is damaged.

Another suitable access point may make it possible to inspect the remaining section. Whether an alternate point exists depends on the property.


Limited or unsuitable access

The available cleanout may be inaccessible, too small, improperly located, or configured in a way that limits camera travel. In some homes, the inspection must begin through another plumbing access point, which can affect the direction or portion of line that can be observed.

Creating or modifying an access point is work for an appropriate plumbing or sewer professional. The sewer inspector documents the access available at the time of inspection.


Camera or distance limitations

Sewer-camera equipment has physical limits. A particularly long service line or unusual configuration may exceed the length or capability of the equipment. The report should identify the inspection limitation and the portion observed when that information is available.


What does an incomplete inspection tell the buyer?

An incomplete scope provides two categories of information.

First, it documents the visible portion of the line. That section may contain useful observations about pipe material, connections, roots, debris, standing water, deterioration, previous repairs, or apparent drainage.

Second, it identifies a limitation. The camera stopped or visibility became inadequate before the intended endpoint was confirmed. The portion beyond that point was not evaluated and should not be assumed to be either acceptable or defective.

That distinction is important. An inspection limitation is not a diagnosis. It is an information gap that the buyer may choose to investigate further.


Normal drainage does not complete the missing picture

Sinks, tubs, showers, and toilets may drain normally even when the entire sewer line cannot be viewed.

Normal drainage is encouraging, but it reflects performance under the conditions observed at that time. It does not reveal the interior of the unseen section or establish why the camera stopped.

This is one reason the limitation should be considered together with the inspection report, video, property history, drainage observations, and recommendations not dismissed solely because fixtures appear to function.


Possible next steps

The appropriate response depends on why the camera could not continue. The report may recommend one or more of the following:

  • Ask the seller for      sewer-cleaning, repair, replacement, or prior inspection records
  • Have the line cleaned by a qualified professional
  • Reinspect the line after cleaning
  • Attempt inspection from another suitable access point
  • Locate the stopping point from the surface
  • Have a qualified sewer contractor evaluate the visible condition
  • Obtain repair options or estimates when warranted
  • Confirm private, municipal, utility, or association responsibility

Not every incomplete scope will require every step. The goal is to address the reason for the limitation and obtain enough information for the buyer to make an informed decision.


Why timing matters during a real estate transaction

An incomplete inspection may require coordination among the buyer, seller, real estate professionals, cleaning company, sewer contractor, and inspection provider. That can take time.

Scheduling the initial sewer scope early in the inspection contingency period may leave more opportunity for cleaning, reinspection, locating, estimates, or review of available records. Waiting until the end of the contingency period can make additional evaluation more difficult to arrange.

Inspect a-Homes offers sewer scopes as an add-on to the General Home Inspection, helping buyers coordinate these services during the same appointment when access and scheduling permit.


Questions to ask when the camera cannot continue

Buyers do not need to interpret the video alone. Useful questions include:

  • How much of the intended line was observed?
  • At approximately what distance did the camera stop?
  • Was the stopping point located from the surface?
  • What appeared to prevent further travel?
  • Did the limitation affect camera movement, visibility, or both?
  • Was another access point available?
  • Is cleaning recommended before reinspection?
  • Should a qualified sewer contractor evaluate the condition?
  • Are prior sewer videos, invoices, permits, or warranties available?
  • Who is responsible for the unobserved section?

Our guide to understanding sewer-scope results explains how common findings and limitations may influence the next step.


Does an incomplete scope mean the buyer should walk away?

An incomplete sewer scope does not make the decision for the buyer.

The reason the inspection stopped may be correctable through cleaning or different access. In other cases, the visible condition may justify specialist evaluation or repair planning. The buyer should consider the available information, the unresolved portion, the inspection timeline, and advice from appropriate professionals.

A sewer-scope report is one part of that decision. It documents the accessible visible conditions and identifies where information is limited.


Different homes can present different limitations

Older properties may contain aging materials, previous repairs, mature-tree roots, or complicated access. 


Newer homes may present construction debris, settlement, installation questions, or limited use history. 


The age of the property may help explain possible concerns, but it does not determine whether the camera will reach the intended endpoint.

Person operating a portable electronic device outdoors.

Copyright © 2022 QRS Inspections - All Rights Reserved.

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

Accept